xorg.conf

Discussion in 'Linux' started by mattjones, Jul 23, 2008.

  1. mattjones

    mattjones

    Joined:
    Jul 18, 2008
    Messages:
    5
    Likes Received:
    0
    Could someone post the default Linpus xorg.conf? I'm installing Arch Linux on my Aspire One and didn't think to keep the old xorg.conf file :)

    Thanks.
     
    mattjones, Jul 23, 2008
    #1
  2. mattjones

    Sid

    Joined:
    Jul 22, 2008
    Messages:
    632
    Likes Received:
    0
    Location:
    UK - (most locations)
    # Xorg configuration created by system-config-display
    Section "ServerFlags"
    Option "DontZap" "yes"
    Option "DontVTSwitch" "yes"
    EndSection

    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Synaptics Mouse" "AlwaysCore"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "gb,us"
    Option "XkbVariant" "euro"
    Option "XkbOptions" "grp:alt_shift_toggle"
    EndSection

    Section "InputDevice"
    Identifier "Synaptics Mouse"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.09"
    Option "MaxSpeed" "0.18"
    Option "AccelFactor" "0.0015"
    Option "SHMConfig" "on"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "no"
    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    Modeline "1024x600" 50.40 1024 1048 1184 1344 600 600 619 625
    # Option "Above" "Monitor1"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "intel"
    # Option "monitor-LVDS" "Monitor0"
    # Option "monitor-VGA" "Monitor1"
    Option "Clone" "true"
    Option "MonitorLayout" "LVDS,VGA"
    BusID "PCI:0:2:0"
    # Screen 0
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x600" "800x600" "640x480"
    Virtual 1024 600
    EndSubSection
    EndSection
     
    Sid, Jul 24, 2008
    #2
  3. mattjones

    Sid

    Joined:
    Jul 22, 2008
    Messages:
    632
    Likes Received:
    0
    Location:
    UK - (most locations)
    Sorry, it wouldn't attach the file correctly, so you got content.
     
    Sid, Jul 24, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ruined xorg.conf

  2. xorg.conf virtual screen resolution - help

  3. xorg.conf for dual monitors

  4. please post the contents of Xorg.conf ubuntu 8.04 killed min

  5. what to change in xorg.conf to use external monitor?

  6. 9.04 UNR xorg.conf strangely empty/ slow video playback

  7. Fairly urgent... /etc/X11/xorg.conf needed for A150AB

  8. xorg.conf gone!!!

Loading...