Screen won turn on after thermal paste replacement ASUS ROG GL503VD

Discussion in 'Laptop Hardware' started by asyx11, Apr 29, 2019.

  1. asyx11

    asyx11

    Joined:
    Apr 29, 2019
    Messages:
    1
    Likes Received:
    0
    Decided to replace the thermal paste on my laptop and followed a guide on youtube, pretty much did the exact same thing he did except mine didnt worked, the system runs but the screen doesnt show anything. so far i tried removing the battery and pressing the power button but it doesn't work for me any ideas what i can do. It was fine before i changed the thermal paste
     
    asyx11, Apr 29, 2019
    #1
    1. Advertisements

  2. asyx11

    something back

    Joined:
    Jun 25, 2011
    Messages:
    1,619
    Likes Received:
    377
    Location:
    North of the Watford Gap ,UK
    Will the laptop go into bios settings by pressing the F2 button and then followed by the power button keeping the F2 button pressed until it boots.

    If it will not then you will have to try to check all the motherboard connections including re greasing the CPU.

    If it will boot into the bios then you will have to use a windows recovery program

    Sorry I can not help further.
     
    something back, Apr 29, 2019
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.