pci slot peg removal

Discussion in 'Acer Aspire One' started by medic550, Dec 10, 2009.

  1. medic550

    medic550

    Joined:
    Dec 10, 2009
    Messages:
    3
    Likes Received:
    0
    I seen the post about snipping the tip off the post to make a pci-e card fit.

    Could you just use a rotary tool with a cutoff wheel and remove the whole post?

    Frank
     
    medic550, Dec 10, 2009
    #1
  2. medic550

    medic550

    Joined:
    Dec 10, 2009
    Messages:
    3
    Likes Received:
    0
    OK. I was able to remove it.. However after i reassembled the netbook my touchpad is not working. The buttons work but not the pad. Where is the connection for it.

    Also How do you secure a full size card in the slot since there is no screw holes at the end.

    Frank
     
    medic550, Dec 10, 2009
    #2
  3. medic550

    medic550

    Joined:
    Dec 10, 2009
    Messages:
    3
    Likes Received:
    0
    ok, i found the touchpad connector came discoinnteced.

    Frank
     
    medic550, Dec 11, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Will try my Mini-PCI-E Slot with 3G card(HSDPA 7.2Mb)

  2. Amazon 6 Cell WWAN Pci-e Slot?

  3. Why doesnt the Mini PCI E work in the slot

  4. free mini PCI slot for WWAN

  5. 3G slot - is it full PCI-E?

  6. free mini pci slot in Aspire One Pro 531h?

  7. 2nd PCI-E slot?

  8. D250 PCI-E Slot

Loading...