ooooooh Idea

This Is Proberly Me Rableing One Again But,
If Your Bought Spare Parts For The Palm Rest, Outer Lcd Casing
And Sprqayed Them Black I Wonder If That Would Look Good
I Might Try It When I Get My One

 

I Need An Opininon Pleeese

 

It would probably be a good idea to lightly sand the pieces you plan on painting with a fine grit sandpaper first. Also get a can of primer meant for plastics and put a few coats of that. Let dry and sand out any bumps or spots before applying your finish coat. Top off with a clear coat if you want.

edit// as always, practice makes perfect. Before you decide to do this to your aao, try it on a piece of scrap plastic you have lying around. Light coats and sufficient drying time in between are key. You don't want runny spots.

 

Cheers I Still Want More Advice And Help

 

Just buy the black parts. And if you wanted to do paint, Enamel would be better.
I would link to MonsterMawds but they don't seem to be up anymore.