adjusting the size of the print dialogue window

Discussion in 'Linux' started by jane, Dec 25, 2009.

  1. jane

    jane

    Joined:
    Dec 28, 2008
    Messages:
    6
    Likes Received:
    0
    I've installed a HP Deskjet D5500 printer on my Aspire One with Linpus Lite. I've managed to print a test page but when printing a photo I find the print dialogue window it is too tall for the screen - the bottom of the window is missing. I presume this is where the 'Print' button is located because there is nothing else there to say Print. Resizing the window does nothing to bring up the bottom of the window. What do I do?
     
    jane, Dec 25, 2009
    #1
  2. jane

    Japser

    Joined:
    Aug 28, 2008
    Messages:
    267
    Likes Received:
    0
    ( Not sure if it applies in your case: )

    The trick is to hold the alt-key and then 'grab' the window somewhere in the middle with the left mouse-button. Now you can move the window up. This does not work if the window is maximised.

    --Japser
     
    Japser, Dec 25, 2009
    #2
  3. jane

    jane

    Joined:
    Dec 28, 2008
    Messages:
    6
    Likes Received:
    0
    Hi Japser,

    Thanks for your help - it did work. Jane
     
    jane, Jan 10, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Tired of adjusting screen brightness (charger/battery)

  2. missing dialogue box buttons

  3. Custom Speedstep - Adjusting multiplier with lowest voltage

  4. Advanced Mode - Window size problem

  5. Thunderbird mail and window size

  6. window size toggle

  7. window size is higher than the height?

  8. Windows 7 Starter window size issue and upgrading to home?

Loading...