Wrong Wlan Board for Commview

Discussion in 'Laptop Hardware' started by fabian, Feb 10, 2009.

  1. fabian

    fabian

    Joined:
    Feb 10, 2009
    Messages:
    1
    Likes Received:
    0
    I have an Aspire 5220 with a LAN Chipset Broadcom 5787M board installed. The problem is that I want to run Commview software which doesn't support this board. I've looked at other boards but there configuration is different from the one shown in my service manual.

    I know that I could use a cardbus to overcome this problem, but there isn't any pcmcia slot on this model. I'd have to buy an Express card/Pcmcia adaptor to be able to use the cardbus but it works out to over £100 for the two cards so its easier to change the Wlan board instead.

    Anyone know where I can get Commview compatable Wlan boards for this model.


    Thanks a lot :roll:
     
    fabian, Feb 10, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.