Upgraded WifI card using the tutorial....something wrong?

Discussion in 'Networking' started by nasty_django, Feb 23, 2009.

  1. nasty_django

    nasty_django

    Joined:
    Feb 19, 2009
    Messages:
    2
    Likes Received:
    0
    I recently upgraded (?) my DG834G v3 to a DGN200 router in the hope I would get a better signal on my netbook upstairs. Alas the performance is much worse for streaming video. I put this down to the Atheros AR5BXB63 card in the netbook so I’ve changed this to an INTEL WIRELESS 4965AGN 802.11N 300MBPS MINI PCI-E CARD. (using the excellent tutorialon this site)

    My question is do I need to tweak some settings on the DGN2000 to get these two to talk to each other properly. Or reading through the forums is the DGN200 a pig in a poke, everyone seems to be going for the rangemax routers?


    P.S The aerial lead supplied with the new wireless card isnt long enough to fit into the screen case so ive mounted it under the mobo - problem?
     
    nasty_django, Feb 23, 2009
    #1
  2. nasty_django

    nasty_django

    Joined:
    Feb 19, 2009
    Messages:
    2
    Likes Received:
    0
    Thanks, Resolved.
     
    nasty_django, Feb 25, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Upgraded to XP now WIFI wont turn on

  2. panel with something wrong

  3. Can I swap the internal WIFI card with a 3G HSDPA card?

  4. Upgraded the RAM on my A1, but now the keyboard dont work*.

  5. Aspire one d250 g wifi card to n wifi card

  6. Replacing the wifi card on the D250

  7. [tutorial] USB install using iDeneb 1.6 lite and iAtkos v7

  8. Wifi card - long card in short slot?

Loading...