Not level on hard surface?

Discussion in 'Acer Aspire One' started by trickyzach, Aug 25, 2008.

  1. trickyzach

    trickyzach

    Joined:
    Aug 22, 2008
    Messages:
    11
    Likes Received:
    0
    Anyone else notice that when you set the aspire one down on a hard surface it is not level. I find this very very annoying. If its a common problem i may just file the rubber mounts down, if its not I may return and replace.

    Anyone?
     
    trickyzach, Aug 25, 2008
    #1
  2. trickyzach

    ekinwang

    Joined:
    Aug 25, 2008
    Messages:
    2
    Likes Received:
    0
    i had the same problem. on mine, the front left nub wasn't completely leveled with the rest.

    what i did was take the rubber nub off, and then added additiona layers to the understide.

    it seems to have resolved the issue
     
    ekinwang, Aug 25, 2008
    #2
  3. trickyzach

    gbee

    Joined:
    Aug 8, 2008
    Messages:
    80
    Likes Received:
    0
    Location:
    England
    My A110 is perfectly level left to right, it slopes down from the back to front but that seems like a deliberate design. It doesn't wobble at all, completely stable.
     
    gbee, Aug 25, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.