My new 8GB SDHC don't work in any slot...?!

Discussion in 'Laptop Hardware' started by sturmtiger, Aug 21, 2008.

  1. sturmtiger

    sturmtiger

    Joined:
    Aug 19, 2008
    Messages:
    9
    Likes Received:
    0
    Location:
    Westerwald, Germany
    Hey there...

    Today I got my new Kingston 8 GB SDHC-Card... I put in at first in the left slot... and? nothing happened... Then I'd put it into the right slot and?! nothing happened too! Then I put it into my "big" Notebook and Vista recognized the card.... I formatted it with FAT32 and tried it again, but no reaction :-/

    Does anyone have an idea what i should do?

    Oh! I own the 110L... With the standard Linpus-System...

    Thank you very much!

    Greetings from Germany,
    Alex
     
    sturmtiger, Aug 21, 2008
    #1
  2. sturmtiger

    Sid

    Joined:
    Jul 22, 2008
    Messages:
    632
    Likes Received:
    0
    Location:
    UK - (most locations)
    Have you enabled advanced mode yet?
     
    Sid, Aug 22, 2008
    #2
  3. sturmtiger

    blackhawk

    Joined:
    Aug 19, 2008
    Messages:
    122
    Likes Received:
    0
    Insert your card and then type "dmesg" (without quote) over terminal window to see kernel message related to your problem.
     
    blackhawk, Aug 22, 2008
    #3
  4. sturmtiger

    sturmtiger

    Joined:
    Aug 19, 2008
    Messages:
    9
    Likes Received:
    0
    Location:
    Westerwald, Germany
    Hi at all!

    Sorry for my late answer... I'm a little bit busy at the moment...

    @sid:
    what do you mean with "advanced mode"? I'd activate the Xfce-Menu, not more at the moment... All other stuff I'll do over the terminal... I think, that's enough for me... But for specific or advanced tasks I'll ask before I'll do something wrong... I'm not that good at linux, but a friend of me could me help at some questions...

    @blackhawk:

    Here's what I see if I type dmesg:

    Code:
    [user@localhost ~]$ dmesg
Linux version 2.6.23.9lw ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005f376000 (usable)
 BIOS-e820: 000000005f376000 - 000000005f3bf000 (reserved)
 BIOS-e820: 000000005f3bf000 - 000000005f46d000 (usable)
 BIOS-e820: 000000005f46d000 - 000000005f4bf000 (ACPI NVS)
 BIOS-e820: 000000005f4bf000 - 000000005f4f0000 (usable)
 BIOS-e820: 000000005f4f0000 - 000000005f4ff000 (ACPI data)
 BIOS-e820: 000000005f4ff000 - 000000005f500000 (usable)
 BIOS-e820: 000000005f500000 - 0000000060000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
629MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 390400) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   390400
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   390400
On node 0 totalpages: 390400
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 1258 pages used for memmap
  HighMem zone: 159766 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 5F4FE120, 0064 (r1 INTEL  Napa            1       1000013)
ACPI: FACP 5F4FC000, 00F4 (r4 INTEL  Napa            1 MSFT  1000013)
ACPI: DSDT 5F4F2000, 5D05 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: FACS 5F488000, 0040
ACPI: SSDT 5F4FD000, 04C4 (r2  PmRef    CpuPm     3000 INTL 20051117)
ACPI: HPET 5F4FB000, 0038 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: APIC 5F4FA000, 0068 (r2 INTEL  Napa            1 MSFT  1000013)
ACPI: MCFG 5F4F9000, 003C (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: ASF! 5F4F8000, 00A5 (r32 INTEL  Napa            1 MSFT  1000013)
ACPI: SLIC 5F4F1000, 0180 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: BOOT 5F4F0000, 0028 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 387350
Kernel command line: ro root=LABEL=linpus vga=0x311 splash=silent loglevel=1 console=tty1 quiet nolapic_timer
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1596.056 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1543468k/1561600k available (1904k kernel code, 16124k reserved, 543k data, 188k init, 643416k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0369000 - 0xc0398000   ( 188 kB)
      .data : 0xc02dc0d8 - 0xc0363fa4   ( 543 kB)
      .text : 0xc0100000 - 0xc02dc0d8   (1904 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3196.10 BogoMIPS (lpj=6392204)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3192.00 BogoMIPS (lpj=6384003)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Total of 2 processors activated (6388.10 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
PM: Fastpoweoff 1.0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (evxfregn-0109): lawson ec 06
 [20070126]
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI Error (evxfregn-0109): lawson ec 06
 [20070126]
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to [email][email protected][/email]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Lawson Test 3
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
pnp: 00:01: ioport range 0x200-0x20f has been reserved
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: 5000-5fff
  MEM window: 77300000-783fffff
  PREFETCH window: 70000000-70ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-4fff
  MEM window: 76300000-772fffff
  PREFETCH window: 71000000-720fffff
PCI: Bridge: 0000:00:1c.2
  IO window: 2000-2fff
  MEM window: 75200000-762fffff
  PREFETCH window: 72100000-730fffff
PCI: Bridge: 0000:00:1c.3
  IO window: 1000-1fff
  MEM window: 74100000-751fffff
  PREFETCH window: 73100000-740fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 102k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x60000000, mapped to 0xf8880000, using 2400k, total 7872k
vesafb: mode is 640x480x16, linelength=1280, pages=11
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 43971 bytes,<6>...found (640x480, 43983 bytes, v3).
Console: switching 1 lawson 
consoles lawson 0 
Console: switching consoles 1-17 to colour frame buffer device 78x25
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000160a0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000160a8 irq 15
ata2.00: ATA-5: P-SSD1800, Ver2.Y0C, max UDMA/66
ata2.00: 15761088 sectors, multi 0: LBA 
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access     ATA      P-SSD1800        Ver2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
TuxOnIce: No attempt was made to resume from any image that might exist.
Freeing unused kernel memory: 188k freed
Warning: unable to open an initial console.
EXT2-fs warning: checktime reached, running e2fsck is recommended
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x78544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
mtrr: no more MTRRs available
Initializing USB Mass Storage driver...
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 5F380C90, 0239 (r2  PmRef  Cpu0Ist     3000 INTL 20051117)
ACPI: SSDT 5F37FE10, 01C7 (r2  PmRef  Cpu0Cst     3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 5F380F10, 00D0 (r2  PmRef  Cpu1Ist     3000 INTL 20051117)
ACPI: SSDT 5F37EF10, 0083 (r2  PmRef  Cpu1Cst     3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Battery Slot [BAT1] (battery present)
r8101 Fast Ethernet driver 1.008.08-2-1-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Identified chip type is 'RTL8102E'.
eth0: RTL8101E at 0xf8b30000, 00:1e:68:a9:56:b3, IRQ 17
ACPI: AC Adapter [ACAD] (off-line)
input: Video Bus as /devices/virtual/input/input6
ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
intel_rng: FWH not detected
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_pci: Acer-5.3.2.13-2008-June-13
Linux video capture interface: v2.00
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:03:00.0 to 64
#####################################################
####################WLAN ID:001c ####################
#####################################################
Setting ah_eepromDetach
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r215)
SAMSoft library init ...
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 14.2 phy 7.0 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x75200000, irq=18
ACPI: PCI Interrupt 0000:04:00.3[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.3 to 64
ACPI: PCI Interrupt 0000:04:00.4[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.4 to 64
sdhci: SDHCI controller found at 0000:04:00.2 [197b:2381] (rev 0)
ACPI: PCI Interrupt 0000:04:00.2[A] -> GSI 19 (level, low) -> IRQ 19
sdhci:slot0: Unknown controller version (1). You may experience problems.
PCI: Setting latency timer of device 0000:04:00.2 to 64
mmc0: SDHCI at 0x74100200 irq 19 DMA
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64


ForteMedia SAM-Soft Library Loaded!

ALC INIT<6>aufs 20080505
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
Could not switch to high resolution mode on CPU 0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
pciehp: Device 0000:02:00.0 already exists at 2:0, cannot hot-add
pciehp: Cannot add device 0x2:0
Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
pciehp: Device 0000:03:00.0 already exists at 3:0, cannot hot-add
pciehp: Cannot add device 0x3:0
Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
pciehp: Device 0000:04:00.0 already exists at 4:0, cannot hot-add
pciehp: Cannot add device 0x4:0
Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
PM: Fastpoweroff, default profile added
Clocksource tsc unstable (delta = -191615845 ns)
wlan: mac acl policy registered
<ath_vap_create> sc_softled = 0
ath_vap_create: LED ON
r8101: eth0: link down
2 del_timer sc_rfkilltimer 
ath_stop_locked: LED OFF 2
del_timer sc_rfkilltimer 
Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
[b]mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 SD8GB 7929856KiB [/b]
 mmcblk0: p1
    I think the last thing is my SD-Card... But why I can't see it or use it?

    I tried to format it in Fat32 and exFat (via Windows Vista)... But nothing happens...

    Greetings and thanks,
    Alex

    edit:
    Right now I'd plug in my USB-Stick and nothing happens, too?! Curios...
     
    sturmtiger, Aug 24, 2008
    #4
  5. sturmtiger

    sturmtiger

    Joined:
    Aug 19, 2008
    Messages:
    9
    Likes Received:
    0
    Location:
    Westerwald, Germany
    Hi there again...

    Today I'd had to recover my system because some other stuff... And now everything works fine and the card was easily recognized... I think I'd damaged something or do something wrong (maybe during I tried to install NTFS-support...)...

    But thank you very much for the help!

    Greetings,
    Alex
     
    sturmtiger, Aug 24, 2008
    #5
  6. sturmtiger

    sturmtiger

    Joined:
    Aug 19, 2008
    Messages:
    9
    Likes Received:
    0
    Location:
    Westerwald, Germany
    Hi there,

    it's me again...

    It seems that my AAO sometimes recognize the SDHC-Card and sometimes it won't work?! I don't why... Yesterday when I came from work everything was perfect... The card was recognized and I got at least about 14 GB. Yesterday evening I got only about 6 GB (I just turned the AAO off and later on again). Later (some restart's later) the card was recognized again. And today it won't work again...

    Did someone have any ideas?!

    That's really annoying :(

    Greetings,
    Alex

    edit:

    Here the actual things dmesg say:

    Code:
    [user@localhost ~]$ dmesg
Linux version 2.6.23.9lw ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005f376000 (usable)
 BIOS-e820: 000000005f376000 - 000000005f3bf000 (reserved)
 BIOS-e820: 000000005f3bf000 - 000000005f46d000 (usable)
 BIOS-e820: 000000005f46d000 - 000000005f4bf000 (ACPI NVS)
 BIOS-e820: 000000005f4bf000 - 000000005f4f0000 (usable)
 BIOS-e820: 000000005f4f0000 - 000000005f4ff000 (ACPI data)
 BIOS-e820: 000000005f4ff000 - 000000005f500000 (usable)
 BIOS-e820: 000000005f500000 - 0000000060000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
629MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 390400) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   390400
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   390400
On node 0 totalpages: 390400
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 1258 pages used for memmap
  HighMem zone: 159766 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 5F4FE120, 0064 (r1 INTEL  Napa            1       1000013)
ACPI: FACP 5F4FC000, 00F4 (r4 INTEL  Napa            1 MSFT  1000013)
ACPI: DSDT 5F4F2000, 5D05 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: FACS 5F488000, 0040
ACPI: SSDT 5F4FD000, 04C4 (r2  PmRef    CpuPm     3000 INTL 20051117)
ACPI: HPET 5F4FB000, 0038 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: APIC 5F4FA000, 0068 (r2 INTEL  Napa            1 MSFT  1000013)
ACPI: MCFG 5F4F9000, 003C (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: ASF! 5F4F8000, 00A5 (r32 INTEL  Napa            1 MSFT  1000013)
ACPI: SLIC 5F4F1000, 0180 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: BOOT 5F4F0000, 0028 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 387350
Kernel command line: ro root=LABEL=linpus vga=0x311 splash=silent loglevel=1 console=tty1 quiet nolapic_timer
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1596.103 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1543468k/1561600k available (1904k kernel code, 16124k reserved, 543k data, 188k init, 643416k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0369000 - 0xc0398000   ( 188 kB)
      .data : 0xc02dc0d8 - 0xc0363fa4   ( 543 kB)
      .text : 0xc0100000 - 0xc02dc0d8   (1904 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3195.99 BogoMIPS (lpj=6391996)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.98 BogoMIPS (lpj=6383968)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Total of 2 processors activated (6387.98 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
PM: Fastpoweoff 1.0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (evxfregn-0109): lawson ec 06
 [20070126]
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI Error (evxfregn-0109): lawson ec 06
 [20070126]
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to [email][email protected][/email]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Lawson Test 3
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
pnp: 00:01: ioport range 0x200-0x20f has been reserved
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: 5000-5fff
  MEM window: 77300000-783fffff
  PREFETCH window: 70000000-70ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-4fff
  MEM window: 76300000-772fffff
  PREFETCH window: 71000000-720fffff
PCI: Bridge: 0000:00:1c.2
  IO window: 2000-2fff
  MEM window: 75200000-762fffff
  PREFETCH window: 72100000-730fffff
PCI: Bridge: 0000:00:1c.3
  IO window: 1000-1fff
  MEM window: 74100000-751fffff
  PREFETCH window: 73100000-740fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 102k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x60000000, mapped to 0xf8880000, using 2400k, total 7872k
vesafb: mode is 640x480x16, linelength=1280, pages=11
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 43971 bytes,<6>...found (640x480, 43983 bytes, v3).
Console: switching 1 lawson 
consoles lawson 0 
Console: switching consoles 1-17 to colour frame buffer device 78x25
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000160a0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000160a8 irq 15
ata2.00: ATA-5: P-SSD1800, Ver2.Y0C, max UDMA/66
ata2.00: 15761088 sectors, multi 0: LBA 
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access     ATA      P-SSD1800        Ver2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
TuxOnIce: No attempt was made to resume from any image that might exist.
Freeing unused kernel memory: 188k freed
Warning: unable to open an initial console.
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x78544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Initializing USB Mass Storage driver...
mtrr: no more MTRRs available
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 5F380C90, 0239 (r2  PmRef  Cpu0Ist     3000 INTL 20051117)
ACPI: SSDT 5F37FE10, 01C7 (r2  PmRef  Cpu0Cst     3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 5F380F10, 00D0 (r2  PmRef  Cpu1Ist     3000 INTL 20051117)
ACPI: SSDT 5F37EF10, 0083 (r2  PmRef  Cpu1Cst     3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: AC Adapter [ACAD] (off-line)
input: Video Bus as /devices/virtual/input/input6
ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
ACPI: Battery Slot [BAT1] (battery present)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
intel_rng: FWH not detected
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
r8101 Fast Ethernet driver 1.008.08-2-1-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Identified chip type is 'RTL8102E'.
eth0: RTL8101E at 0xf8b44000, 00:1e:68:a9:56:b3, IRQ 17
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
wlan: 0.8.4.2 (Atheros/multi-bss)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_pci: Acer-5.3.2.13-2008-June-13
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
ACPI: PCI Interrupt 0000:04:00.4[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.4 to 64
ACPI: PCI Interrupt 0000:04:00.3[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.3 to 64
sdhci: SDHCI controller found at 0000:04:00.2 [197b:2381] (rev 0)
ACPI: PCI Interrupt 0000:04:00.2[A] -> GSI 19 (level, low) -> IRQ 19
sdhci:slot0: Unknown controller version (1). You may experience problems.
PCI: Setting latency timer of device 0000:04:00.2 to 64
mmc0: SDHCI at 0x74100200 irq 19 DMA
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:03:00.0 to 64
#####################################################
####################WLAN ID:001c ####################
#####################################################
Setting ah_eepromDetach
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r215)
SAMSoft library init ...
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64


ForteMedia SAM-Soft Library Loaded!

ALC INIT<6>mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 SD8GB 7929856KiB 
 mmcblk0: p1
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 14.2 phy 7.0 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x75200000, irq=18
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
pciehp: Device 0000:02:00.0 already exists at 2:0, cannot hot-add
pciehp: Cannot add device 0x2:0
Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
pciehp: Device 0000:03:00.0 already exists at 3:0, cannot hot-add
pciehp: Cannot add device 0x3:0
Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
pciehp: Device 0000:04:00.0 already exists at 4:0, cannot hot-add
pciehp: Cannot add device 0x4:0
Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
aufs 20080505
mmcblk0: error 1 transferring data
end_request: I/O error, dev mmcblk0, sector 15859648
Buffer I/O error on device mmcblk0, logical block 1982456
PM: Fastpoweroff, default profile added
Clocksource tsc unstable (delta = -177275066 ns)
wlan: mac acl policy registered
<ath_vap_create> sc_softled = 0
ath_vap_create: LED ON
r8101: eth0: link down
2 del_timer sc_rfkilltimer 
ath_stop_locked: LED OFF 2
del_timer sc_rfkilltimer 
Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
mmc0: card 0002 removed
mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 SD8GB 7929856KiB 
 mmcblk0: p1
mmc0: card 0002 removed
mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 SD8GB 7929856KiB 
 mmcblk0: p1
mmc0: card 0002 removed
mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 SD8GB 7929856KiB 
 mmcblk0: p1
    edit2:
    Got it back to work! If I boot without the Card and put it when it's powered on, the card works perfect... But it seems if I boot with the card the Extension won't work and no USB-Flashdrives (i hope that's the right word) would be recognized... After the reboot everything work's fine again... Very, very curios...

    Here's the output of dmesg when the card works:

    Code:
    [user@localhost ~]$ dmesg
Linux version 2.6.23.9lw ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005f376000 (usable)
 BIOS-e820: 000000005f376000 - 000000005f3bf000 (reserved)
 BIOS-e820: 000000005f3bf000 - 000000005f46d000 (usable)
 BIOS-e820: 000000005f46d000 - 000000005f4bf000 (ACPI NVS)
 BIOS-e820: 000000005f4bf000 - 000000005f4f0000 (usable)
 BIOS-e820: 000000005f4f0000 - 000000005f4ff000 (ACPI data)
 BIOS-e820: 000000005f4ff000 - 000000005f500000 (usable)
 BIOS-e820: 000000005f500000 - 0000000060000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
629MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 390400) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   390400
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   390400
On node 0 totalpages: 390400
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 1258 pages used for memmap
  HighMem zone: 159766 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 5F4FE120, 0064 (r1 INTEL  Napa            1       1000013)
ACPI: FACP 5F4FC000, 00F4 (r4 INTEL  Napa            1 MSFT  1000013)
ACPI: DSDT 5F4F2000, 5D05 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: FACS 5F488000, 0040
ACPI: SSDT 5F4FD000, 04C4 (r2  PmRef    CpuPm     3000 INTL 20051117)
ACPI: HPET 5F4FB000, 0038 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: APIC 5F4FA000, 0068 (r2 INTEL  Napa            1 MSFT  1000013)
ACPI: MCFG 5F4F9000, 003C (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: ASF! 5F4F8000, 00A5 (r32 INTEL  Napa            1 MSFT  1000013)
ACPI: SLIC 5F4F1000, 0180 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: BOOT 5F4F0000, 0028 (r1 INTEL  Napa            1 MSFT  1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 387350
Kernel command line: ro root=LABEL=linpus vga=0x311 splash=silent loglevel=1 console=tty1 quiet nolapic_timer
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1596.121 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1543468k/1561600k available (1904k kernel code, 16124k reserved, 543k data, 188k init, 643416k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0369000 - 0xc0398000   ( 188 kB)
      .data : 0xc02dc0d8 - 0xc0363fa4   ( 543 kB)
      .text : 0xc0100000 - 0xc02dc0d8   (1904 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3195.94 BogoMIPS (lpj=6391899)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.99 BogoMIPS (lpj=6383997)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Total of 2 processors activated (6387.94 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
PM: Fastpoweoff 1.0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (evxfregn-0109): lawson ec 06
 [20070126]
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI Error (evxfregn-0109): lawson ec 06
 [20070126]
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to [email][email protected][/email]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Lawson Test 3
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
pnp: 00:01: ioport range 0x200-0x20f has been reserved
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: 5000-5fff
  MEM window: 77300000-783fffff
  PREFETCH window: 70000000-70ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-4fff
  MEM window: 76300000-772fffff
  PREFETCH window: 71000000-720fffff
PCI: Bridge: 0000:00:1c.2
  IO window: 2000-2fff
  MEM window: 75200000-762fffff
  PREFETCH window: 72100000-730fffff
PCI: Bridge: 0000:00:1c.3
  IO window: 1000-1fff
  MEM window: 74100000-751fffff
  PREFETCH window: 73100000-740fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 102k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x60000000, mapped to 0xf8880000, using 2400k, total 7872k
vesafb: mode is 640x480x16, linelength=1280, pages=11
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 43971 bytes,<6>...found (640x480, 43983 bytes, v3).
Console: switching 1 lawson 
consoles lawson 0 
Console: switching consoles 1-17 to colour frame buffer device 78x25
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000160a0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000160a8 irq 15
ata2.00: ATA-5: P-SSD1800, Ver2.Y0C, max UDMA/66
ata2.00: 15761088 sectors, multi 0: LBA 
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access     ATA      P-SSD1800        Ver2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
TuxOnIce: No attempt was made to resume from any image that might exist.
Freeing unused kernel memory: 188k freed
Warning: unable to open an initial console.
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x78544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Initializing USB Mass Storage driver...
mtrr: no more MTRRs available
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ACPI: SSDT 5F380C90, 0239 (r2  PmRef  Cpu0Ist     3000 INTL 20051117)
ACPI: SSDT 5F37FE10, 01C7 (r2  PmRef  Cpu0Cst     3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 5F380F10, 00D0 (r2  PmRef  Cpu1Ist     3000 INTL 20051117)
ACPI: SSDT 5F37EF10, 0083 (r2  PmRef  Cpu1Cst     3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SLPB]
input: Video Bus as /devices/virtual/input/input6
ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
r8101 Fast Ethernet driver 1.008.08-2-1-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Identified chip type is 'RTL8102E'.
eth0: RTL8101E at 0xf8b22000, 00:1e:68:a9:56:b3, IRQ 17
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
wlan: 0.8.4.2 (Atheros/multi-bss)
intel_rng: FWH not detected
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
Linux video capture interface: v2.00
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_pci: Acer-5.3.2.13-2008-June-13
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r215)
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:03:00.0 to 64
#####################################################
####################WLAN ID:001c ####################
#####################################################
Setting ah_eepromDetach
SAMSoft library init ...
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64


ForteMedia SAM-Soft Library Loaded!

ALC INITMarking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
Could not switch to high resolution mode on CPU 0
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 14.2 phy 7.0 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x75200000, irq=18
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
pciehp: Device 0000:02:00.0 already exists at 2:0, cannot hot-add
pciehp: Cannot add device 0x2:0
Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
pciehp: Device 0000:03:00.0 already exists at 3:0, cannot hot-add
pciehp: Cannot add device 0x3:0
Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PM: Fastpoweroff, default profile added
Clocksource tsc unstable (delta = -191524866 ns)
aufs 20080505
wlan: mac acl policy registered
<ath_vap_create> sc_softled = 0
ath_vap_create: LED ON
r8101: eth0: link down
2 del_timer sc_rfkilltimer 
ath_stop_locked: LED OFF 2
del_timer sc_rfkilltimer 
Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     Generic  USB Flash Drive  1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] 2009089 512-byte hardware sectors (1029 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 2009089 512-byte hardware sectors (1029 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
pciehp: Card present on Slot(0004_0000)
program_fw_provided_values: Could not get hotplug parameters
program_fw_provided_values: Could not get hotplug parameters
program_fw_provided_values: Could not get hotplug parameters
program_fw_provided_values: Could not get hotplug parameters
sdhci: SDHCI controller found at 0000:04:00.2 [197b:2381] (rev 0)
PCI: Enabling device 0000:04:00.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:04:00.2[A] -> GSI 19 (level, low) -> IRQ 19
sdhci:slot0: Unknown controller version (1). You may experience problems.
PCI: Setting latency timer of device 0000:04:00.2 to 64
mmc0: SDHCI at 0x74100100 irq 19 DMA
PCI: Enabling device 0000:04:00.3 (0000 -> 0002)
ACPI: PCI Interrupt 0000:04:00.3[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.3 to 64
PCI: Enabling device 0000:04:00.4 (0000 -> 0002)
ACPI: PCI Interrupt 0000:04:00.4[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.4 to 64
mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 SD8GB 7929856KiB 
 mmcblk0: p1
mmcblk0: error 1 transferring data
end_request: I/O error, dev mmcblk0, sector 15856494
Buffer I/O error on device mmcblk0p1, logical block 7928216
end_request: I/O error, dev mmcblk0, sector 15856496
Buffer I/O error on device mmcblk0p1, logical block 7928217
end_request: I/O error, dev mmcblk0, sector 15856498
Buffer I/O error on device mmcblk0p1, logical block 7928218
fuse init (API version 7.8)
aufs test_add:377:mount[4074]: uid/gid/perm /tmp/posixdir 500/0/0755, 500/500/0755
usb 1-2: USB disconnect, address 3
Buffer I/O error on device sdb1, logical block 494
lost page write due to I/O error on sdb1
Buffer I/O error on device sdb1, logical block 495
lost page write due to I/O error on sdb1
[user@localhost ~]$
     
    sturmtiger, Aug 27, 2008
    #6
  7. sturmtiger

    bazz1249

    Joined:
    Sep 10, 2008
    Messages:
    6
    Likes Received:
    0
    I emailed Acer about this and they told me that Linux might not fully work with SDHC cards until later updates, they said that although the hardware can take the cards, the Linux versions dont seem to be able to take them all the time like the Windows versions can.. Thats why im a bit put off about buying a 16 or 32gb card
     
    bazz1249, Sep 13, 2008
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 8GB SDHC card in expansion slot not increasing total memory

  2. Make the Storage Expansion SDHC slot act like normal SDHC

  3. Crucial 8GB SDHC Flash Card (Class 6) $9.99 shipped @ Newegg

  4. can´t find my 8GB sdhc card anymore

  5. can´t find my 8GB sdhc card anymore

  6. c: and d: drive with 8gb+8gb SDD model (A110)

  7. Win7 -> 8GB SDHC

  8. 8gb SDHC seen as 4GB

Loading...