Is the wlan module heating, how to cool it down?

Discussion in 'Modding and Customization' started by HVL, Jan 28, 2009.

  1. HVL

    HVL

    Joined:
    Jan 27, 2009
    Messages:
    19
    Likes Received:
    0
    According to the different post, It looks like that the Northbridge is heating a lot, so I will probably add a heatsink there.

    Currently I run the AA1FanControl at 65C. (Did try A1CTL but for some reason it start the fan at full speed?)

    The main heat that I feel, is to the right of the touchpad, I believe that It is where the wlan module reside on the AOA 110.

    So my guess, is that we also need to find a way to reduce the heat of the wlan module?

    Anyone run an Infrared thermometer on the different parts?

    Regards,

    HVL
    AOA-110 (Bios 3305)
     
    HVL, Jan 28, 2009
    #1
  2. HVL

    jackluo923

    Joined:
    Aug 26, 2008
    Messages:
    843
    Likes Received:
    0
    AA1 control measure temperature in C not F. 65C is like 180F or somethig.
    You can set the power save mode maxium in device manager.
     
    jackluo923, Jan 29, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to: get a cool and functional mac-os like bar

  2. Are there any cool MMORPG's on the Acer??

  3. How make cool dektop?

  4. heads up for the coveted hynix 2GB module..

  5. Over heating problem

  6. Shopping Advice: HP Spectre x360 Heating and Throttling?

  7. Over Heating Issues

  8. Heating-Dell

Loading...