HP Probook 645 G1 - screwdriver type to remove 'M2.5' screws?

Discussion in 'Laptop Hardware' started by JimmyJazz, Apr 23, 2018.

  1. JimmyJazz

    JimmyJazz

    Joined:
    Apr 23, 2018
    Messages:
    1
    Likes Received:
    0
    Hello,
    I have an HP Probook 645 G1 and I need to remove the internal plastic cover to access the motherboard.
    This plastic cover is attached with what appear to be torx screws and the printed on the cover, where each screw is located is the indication that these are 'M2.5' screws eg. 'M2.5x4' - suggesting to me M2.5 screw heads.
    - See the attached photo.

    Can someone clarify what type of M2.5 screw driver i need to remove these?
    I looked at Torx screw drivers but they all appear to be larger 'Txx' sizes.
    A browse of some online retailers (eg. RS components and Maplin) does not make it obvious what screwdriver type i should purchase.

    Thanks,
    James.





    IMG_9171.JPG
     
    JimmyJazz, Apr 23, 2018
    #1
  2. JimmyJazz

    something back

    Joined:
    Jun 25, 2011
    Messages:
    1,639
    Likes Received:
    392
    Location:
    North of the Watford Gap ,UK
    I don't think it's any thing special just a standard torx screw, try poundlands torx bits
     
    something back, Apr 23, 2018
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.