Dual-boot doesn't work after HDD replacement

Discussion in 'Windows' started by GvidoR, Jan 31, 2009.

  1. GvidoR

    GvidoR

    Joined:
    Sep 11, 2008
    Messages:
    556
    Likes Received:
    0
    Location:
    Japan.
    Hello,
    I tried searching the forum for this problem but didn't find a solution.
    I replaced my hard drive yesterday, I did a complete image (backup) of the original hard drive, put it on to the new one but the dual-boot didn't work (WinXP + Win7). OK, so I took my Windows Vista DVD and did startup repair, Windows 7 works but how do I get Windows XP to work again?
    Thanks,
    GvidoR
     
    GvidoR, Jan 31, 2009
    #1
  2. GvidoR

    goofball

    Joined:
    Aug 23, 2008
    Messages:
    710
    Likes Received:
    0
    try repairing using BCD.
     
    goofball, Jan 31, 2009
    #2
  3. GvidoR

    GvidoR

    Joined:
    Sep 11, 2008
    Messages:
    556
    Likes Received:
    0
    Location:
    Japan.
    What's BCD? Is it Boot CD?
    If so which one? Hiren's Boot CD? Which Tool?
    I already tried FixBoot (FixMBR) from Hiren's Boot CD.. it did nothing at all
     
    GvidoR, Jan 31, 2009
    #3
  4. GvidoR

    goofball

    Joined:
    Aug 23, 2008
    Messages:
    710
    Likes Received:
    0
    No, it's a bootloader editor for Vista, I believe that Windows 7 uses the same bootloader.

    Use EasyBCD to edit.

    http://neosmart.net/dl.php?id=1
     
    goofball, Jan 31, 2009
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.