Delock industry USB2.0 CMOS camera module 1.3MP

Discussion in 'Modding and Customization' started by Vellu1967, Jul 17, 2011.

  1. Vellu1967

    Vellu1967

    Joined:
    Jun 16, 2011
    Messages:
    10
    Likes Received:
    0
    Location:
    Finland
    I found no hits with "delock" from this forum, so I decided to open a new thread.

    I found this module in local computer store for 27,90€. The price is a little salty, but while opening the lid for touchscreen mod, that would be "nice to have" at the same time.
    http://www.verkkokauppa.com/fi/product/ ... eLOCK-CMOS

    http://www.delock.com/produkte/gruppen/ ... 2&action=&
    http://www.delock.com/view/pdf/95852/A/3455/

    Can anyone say, if this module fits AOA150?
    Do you have any other suggestions for better than original camera, that fits AOA150?
     
    Vellu1967, Jul 17, 2011
    #1
  2. Vellu1967

    Vellu1967

    Joined:
    Jun 16, 2011
    Messages:
    10
    Likes Received:
    0
    Location:
    Finland
    I went and bought it. Seems that I'm unable to upload the picture that I just took.
    I won't be opening the computer until I get more stuff that I plan to put inside (ssd, touchscreen, 802.11n+bluetooth pci-e, heatsinks in the air canal),
    it might be a couple of weeks, before I get anything done.
     
    Vellu1967, Jul 18, 2011
    #2
  3. Vellu1967

    Vellu1967

    Joined:
    Jun 16, 2011
    Messages:
    10
    Likes Received:
    0
    Location:
    Finland
    The device fits the place of the camera, except the lens. You would have to drill a hole on the bezel to make the lens fit.

    But the sad part is that the lens and the box around it got detached from the circuit board, so I did not continue with the installation of this module.
    Let's see if I get it replaced, then maybe.
     
    Vellu1967, Aug 7, 2011
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.